Achieves high precision machining while suppressing the cumulative pitch error to the utmost in progressive press dies and etc. where high precision is accelerating
Direct drive method without a ball screw was established, utilizing a high performance linear motor developed and manufactured in-house for the 4 axes of X, Y, U and V. Precise axis movements without backlash can be maintained semi-permanently. Demonstrates accurate position control and excellent discharge characteristics while machining, through the high response and high following characteristics which are the features of the linear motor.
Has a 19-inch horizontal type touch panel, realizing the most up-to-date man-machine interface and also ensuring ease of viewing and ease of use. This machine is standardly equipped with the "barrel-free effect control II" which greatly reduces the barrel amount during machining, and "TMP Control II" which improves the surface roughness of the second cut and realizes high speed finish machining.
Sodick pursued ultra-high precision in the machining, assembly and adjustment of machinery. By adopting ultra-high precision roller guides, high rigidity was also achieved. While standardly equipped with doors made of CFRP, the accuracy was thoroughly pursued in all factors originating in the machining accuracy to temperature control by a high quality inverter cooler.
Work tank inner dimensions W x D | 33.46" x 24.02" (850 x 610mm) |
X - Axis Travel | 15.78" (400mm) |
Y - Axis Travel | 11.81" (300mm) |
Z - Axis Travel | 9.84" (250mm) |
U x V axis travel (mm) | 5.91" x 5.91" (150 x 150 mm) |
Max. taper angle | ±25° plate thickness:5.12" (130mm) |
Max. workpiece dimensions(During flushing machining)W x D x H (mm) | 23.62" x 18.50" x 9.49" (600 x 470 x 240mm) |
Max. workpiece dimensions(During submerged machining)W x D x H (mm) | 23.62" x 18.50" x 9.49" (600 x 470 x 240mm) |
Max. weight of workpiece(During flushing machining)(kg) | 1102.3lbs.(500kg) |
Max. weight of workpiece(During submerged machining)(kg) | 771.62lbs.(350kg) |
Wire electrode diameter (mm) | .002" ~.012" (0.05 ~ 0.3mm) *1 |
Wire tension (N) | 3 ~ 23 |
Maximum wire feed rate (mm/sec) | 16.54" (420mm) |
Distance from floor surface to upper surface of table (mm) | 39.17" (995mm) |
Machine tool dimensions W x D x H (mm) | 83.27" x 98.43" x 87.80" (2115 x 2500 x 2230mm) *2 |
Machine installation dimensions W x D (mm) | 131.89" x 151.57" (3350 x 3850mm) |
Total unit weight(kg) | 7495.7lbs. (3400kg) *3 |
Total power input | 3-phase 50/60Hz 13 kVA |