PDA

View Full Version : Manual for 4 position shuttle tool changer Mark TX Power Supply

Jim
02-23-05, 01:40 PM
Looking for a manual for a four position tool changer shuttle style. 1992 Mold Maker w/ Mark TX power supply. I need the M codes to operate.
Bob Massei- Sodick Service
03-17-05, 03:17 PM
The M codes are:
M110 = Shuttle forward,
M120 = Shuttle retract,
M170 = Forward confirmation,
M171 = Retract confirmation,
M42 and M43 = Chuck clamp,
M32 and M33 = Chuck unclamp,
M172 = Air pressure confirmation.